motori brushless autocostruiti e modificati da pc - Pagina 3

ron_van_sommeren · 03 febbraio 04, 23:24

N50 magnets, 5*5*1.2mm, available from http://www.supermagnete.ch -> link 'quader'

ron_van_sommeren · 11 marzo 04, 20:33

CD-ROM motor/stator ordering:
CD-rom motor/stator source:
http://www.rcgroups.com/forums/showthread....threadid=203806

ron_van_sommeren · 29 aprile 04, 01:31

A cd-rom conversion tutorial:
http://www.gobrushless.com/Tutorial_Stock_Single.doc

CantZ506 · 29 aprile 04, 16:34

Thanks Ron, very intersting links!
Where can I find some data about performance o comparision to commercial BL motors or to speed series motors?

ron_van_sommeren · 29 aprile 04, 16:40

Piero, you have to keep an eye on the cd-rom discussions in the 'power systems' subforum over at www.ezonemag.com . Results are published there.

An Italian cd-rom conversion manual

http://www.toflyrc.com/
-> "Come utilizzare i motori dei Cd-Rom sui modelli Rc...."

CantZ506 · 29 aprile 04, 17:00

Wow! If those motors run as fast as you answer, they must be super!

Thanks.

ron_van_sommeren · 29 aprile 04, 17:12

'Fast' is my middle name

If by any chance you're looking for high-rpm cd-rom motors for ducted fan jets:
http://www.rcgroups.com/forums/showthread....threadid=140736
http://www.rcgroups.com/forums/showthread....threadid=158158

ron_van_sommeren · 02 giugno 04, 15:04

A discussion about the toxic and fire risks when grinding/cutting Neo
magnets, precautions to take. The discussion starts here:
http://www.rcgroups.com/forums/showp...&postcount=108
http://www.rcgroups.com/forums/showp...&postcount=109
http://www.rcgroups.com/forums/showp...&postcount=124
http://www.rcgroups.com/forums/showp...&postcount=125
http://www.rcgroups.com/forums/showp...&postcount=139
http://www.rcgroups.com/forums/showp...&postcount=140
http://www.rcgroups.com/forums/showp...&postcount=143

ron_van_sommeren · 24 luglio 04, 15:48

Checks and tests to perform before connecting cd-rom/lrk motor to controller and battery. The thread will answer lots of questions you might want to ask:
http://www.rcgroups.com/forums/showthread.php?t=254476

English winding diagram table, upper/lowercase character winding notation and colours explained at bottom of page:
http://www.alexrc.com/nutpol_e.htm

ron_van_sommeren · 24 luglio 04, 15:49

Checks and tests to perform before connecting cd-rom/lrk motor to controller and battery. The thread will answer lots of questions you might want to ask:
http://www.rcgroups.com/forums/showthread.php?t=254476

English winding diagram table, upper/lowercase character winding notation and colours explained at bottom of page:
http://www.alexrc.com/nutpol_e.htm

29 aprile 04, 16:34	#24 (permalink) Top
CantZ506 UserPlus Data registr.: 10-04-2004 Residenza: Brescia Messaggi: 8.177 Immagini: 1	Thanks Ron, very intersting links! Where can I find some data about performance o comparision to commercial BL motors or to speed series motors? __________________ Ciao, , perchè... non federato fiam! www.adottauncanesciolto.org

29 aprile 04, 17:00	#26 (permalink) Top
CantZ506 UserPlus Data registr.: 10-04-2004 Residenza: Brescia Messaggi: 8.177 Immagini: 1	Wow! If those motors run as fast as you answer, they must be super! Thanks. __________________ Ciao, , perchè... non federato fiam! www.adottauncanesciolto.org

02 giugno 04, 15:04	#28 (permalink) Top
ron_van_sommeren User Data registr.: 26-12-2003 Residenza: near Nijmegen, the Netherlands Messaggi: 469	careful when grinding/cutting Neodymium magnets A discussion about the toxic and fire risks when grinding/cutting Neo magnets, precautions to take. The discussion starts here: http://www.rcgroups.com/forums/showp...&postcount=108 http://www.rcgroups.com/forums/showp...&postcount=109 http://www.rcgroups.com/forums/showp...&postcount=124 http://www.rcgroups.com/forums/showp...&postcount=125 http://www.rcgroups.com/forums/showp...&postcount=139 http://www.rcgroups.com/forums/showp...&postcount=140 http://www.rcgroups.com/forums/showp...&postcount=143

Strumenti discussione
Visualizza versione stampabile Invia questa pagina via e-mail
Visualizzazione
Modalità lineare Modalità ibrida Modalità elencata

Discussioni simili
Discussione	Autore discussione	Forum	Commenti	Ultimo Messaggio
sondaggio motori bl autocostruiti	cantone11	Aeromodellismo Volo Elett. - Realizzazione Motori	4	19 giugno 07 16:08
Come mettere in asse le campane nei motori brushless autocostruiti	gmo78	L'uovo di Colombo	0	18 dicembre 05 22:17
Nuovo Forum per motori Brushless autocostruiti?	BaroneRosso	Aeromodellismo Volo Elettrico	28	09 novembre 04 20:04
nessun tornio, motori brushless autocostruiti	ron_van_sommeren	Aeromodellismo Volo Elett. - Realizzazione Motori	5	26 gennaio 04 02:39
motori brushless autocostruiti e modificati da pc	agomago	Aeromodellismo Volo Elettrico	0	22 novembre 03 00:28

03 febbraio 04, 23:24	#21 (permalink) Top
ron_van_sommeren User Data registr.: 26-12-2003 Residenza: near Nijmegen, the Netherlands Messaggi: 469	N50 magnets, 551.2mm, available from http://www.supermagnete.ch -> link 'quader'

11 marzo 04, 20:33	#22 (permalink) Top
ron_van_sommeren User Data registr.: 26-12-2003 Residenza: near Nijmegen, the Netherlands Messaggi: 469	CD-ROM motor/stator ordering: CD-rom motor/stator source: http://www.rcgroups.com/forums/showthread....threadid=203806

29 aprile 04, 01:31	#23 (permalink) Top
ron_van_sommeren User Data registr.: 26-12-2003 Residenza: near Nijmegen, the Netherlands Messaggi: 469	A cd-rom conversion tutorial: http://www.gobrushless.com/Tutorial_Stock_Single.doc

29 aprile 04, 16:40	#25 (permalink) Top
ron_van_sommeren User Data registr.: 26-12-2003 Residenza: near Nijmegen, the Netherlands Messaggi: 469	Piero, you have to keep an eye on the cd-rom discussions in the 'power systems' subforum over at www.ezonemag.com . Results are published there. An Italian cd-rom conversion manual http://www.toflyrc.com/ -> "Come utilizzare i motori dei Cd-Rom sui modelli Rc...."

29 aprile 04, 17:12	#27 (permalink) Top
ron_van_sommeren User Data registr.: 26-12-2003 Residenza: near Nijmegen, the Netherlands Messaggi: 469	'Fast' is my middle name If by any chance you're looking for high-rpm cd-rom motors for ducted fan jets: http://www.rcgroups.com/forums/showthread....threadid=140736 http://www.rcgroups.com/forums/showthread....threadid=158158

24 luglio 04, 15:48	#29 (permalink) Top
ron_van_sommeren User Data registr.: 26-12-2003 Residenza: near Nijmegen, the Netherlands Messaggi: 469	Checks and tests to perform before connecting cd-rom/lrk motor to controller and battery. The thread will answer lots of questions you might want to ask: http://www.rcgroups.com/forums/showthread.php?t=254476 English winding diagram table, upper/lowercase character winding notation and colours explained at bottom of page: http://www.alexrc.com/nutpol_e.htm

24 luglio 04, 15:49	#30 (permalink) Top
ron_van_sommeren User Data registr.: 26-12-2003 Residenza: near Nijmegen, the Netherlands Messaggi: 469	Checks and tests to perform before connecting cd-rom/lrk motor to controller and battery. The thread will answer lots of questions you might want to ask: http://www.rcgroups.com/forums/showthread.php?t=254476 English winding diagram table, upper/lowercase character winding notation and colours explained at bottom of page: http://www.alexrc.com/nutpol_e.htm